BC Biomedical ESU-2000 Series Guide Manuel d'utilisateur télécharger pdf (Page 33)

The GRAPH MODE allows the user to view the measured waveform in the display. The

horizontal axis can be zoomed in to display higher frequency waveform components. The

vertical axis is auto-scaling and cannot be adjusted. Any of the stored waveforms can be

graphed. Additionally, if the unit is placed in the HOLD MODE, the user can adjust which

portion of the waveform is being displayed.

NOTE: Due to the limited number of pixels in the display, this should not be used as a

calibrated reference, rather as a quick check of the waveform being measured.

Use to enter the GRAPH MODE.

Use to exit the GRAPH MODE.

Selecting a Waveform

Use to select the waveform to be graphed, Ram or Location 1-3.

GRAPH MODE

RAM

Waveform

Location

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Pas de commentaire

BC Biomedical ESU-2000 Series Guide Manuel d'utilisateur Page 33