BC Biomedical IPA-2000S Manuel d'utilisateur télécharger pdf (Page 68)

2-36

MANUALLY PRINTING REPORTS

PRINTING REPORPRINTING REPOR

PRINTING REPOR

TSTS

MANUALLY PRINTING REPORTS

Set Desired Printing Setup Parameters

When and in what format a report is printed are set using

the parameters found in the User Stack of the Setup

screens. Choose the PRINT MODE, PRINT PORT, PRINT

FORMAT and whether all Datalogs are to be printed.

(See USER SETUP for more details.)

STEP 1

NOTES:

CThere are two modes available as

printing options, Manual and

Automatic (Summary, Data or Both).

CWhen PRINT MODE is set to Manual

in User Setup, reports can be printed

from Datalog screens for individual

tests.

CPRINT PORT can be set to serial,

parallel or none. If set to none, a

message will display requesting a port

be selected before printing will occur.

Go to a Datalog Screen

From the Main Screen or a channel screen, use to

enter the Datalog screens. Use to toggle between

the channels.

STEP 2

NOTES:

CAll saved Datalogs are accessible

from the Main Screen.

CDatalogs are accessible through the

individual channels only when

modules are connected.

CThe Print Mode determines whether

the report will contain Summary

Information, Data or Both and is

chosen from the Datalog Edit screen.

(See DAT ALOG for more details.)

CHAN1 DATALOG- VIEW

RECORD TYPE FLOW

PRINT SUMMARY & DATA

RECORD NUMBER 01

Using the Datalog View and Edit screens, select the

individual record type, print mode and record number to be

printed. (See DATALOG for more details.)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 161 162

Commentaires sur ces manuels

Pas de commentaire

BC Biomedical IPA-2000S Manuel d'utilisateur Page 68

Commentaires sur ces manuels

Produits connexes et manuels pour Mesure, test et contrôle BC Biomedical IPA-2000S